Formulated with a citric acid base, Citri-Brite I & II are powerful yet non-aggressive brighteners designed for use in immersion dip tanks or spray cleaning systems. Both versions work quickly to dissolve tarnish and oxidation on copper and brass, leaving a clean, polished finish.

• Citri-Brite I is optimized for immersion cleaning applications, offering a controlled cleaning rate and consistent brightening for multiple parts or components at once.

• Citri-Brite II is ideal for spray systems, delivering the same non-etching performance with improved surface wetting and flow characteristics.

Both formulas may be used at room temperature or heated up to 150°F to accelerate the cleaning of heavy or aged tarnish. Citri-Brite will not harm copper or brass, even after extended periods of immersion, and leaves no residue when properly rinsed.

Specifications:

• Type: Citric acid–based copper/brass brightener

• Color: Clear

• Dilution: Use as-is or per system setup (immersion/spray)

• Temperature Range: Room temperature to 150°F

• Cleaning Time: 1–7 minutes (immersion)

• Safe On: Copper and brass

• Non-Etching: Yes

• Country of Origin: Made in the USA

• Available Sizes: 5-Gallon and 55-Gallon drums

Directions for Use:

1. Prepare bath or spray system with Citri-Brite I or II.

2. Immerse or spray parts for 1–7 minutes, depending on the degree of tarnish.

3. For faster cleaning or heavy buildup, heat bath up to 150°F.

4. After cleaning, rinse thoroughly with water to remove all residues.

5. Allow to dry completely before handling or applying any coatings.

⚠️ Safety Note:
Citri-Brite may cause eye and skin irritation and should be used only with adequate ventilation. Avoid inhalation and contact with eyes or skin. Always wear gloves, eye protection, and protective clothing when handling.