Taginator is a high-performance graffiti remover engineered for unpainted masonry, including brick, stone, concrete, cinder block, stucco, and slate. Its advanced, biodegradable formula powerfully dissolves a wide range of coatings, from spray paint and enamels to lacquers, inks, and even multi-layered graffiti, leaving surfaces clean and pristine. It is trusted by professionals for its strength and environmental profile.

Designed for maximum efficiency and cost-effectiveness, one gallon of Taginator covers up to 250 square feet and includes a deep-rinse additive to simplify pressure washing. This versatile solution is ready for action in any climate, performing reliably on both wet and dry surfaces in temperatures from freezing cold to extreme heat, with no risk of surface damage.

Specifications

• Form: Liquid

• Color: Dark Umber

• Odor: Fresh & Clean Scented

• Coverage: 175 to 250 sq. ft. per gallon

• Effective Temperature Range: 10º F to >100º F

• Biodegradable: Yes

• Flammability: No

• Carcinogens: None

• Phosphates: None

• V.O.C. Content: <30% by weight

• Density: 9.8 lbs / Gal

• Stability (unopened): 3 years

Directions for Use

1. Spray Taginator onto the graffiti-covered surface (application with the ETS TagSprayer is ideal).

2. Allow the product to dwell for 5–20 minutes. For colder conditions, a longer dwell time may be required.

3. Pressure rinse the surface clean. No scrubbing is necessary.

⚠️ WARNING

• Always read the Safety Data Sheet (SDS) before use

• Avoid contact with eyes and skin

• Do not ingest

• Keep out of reach of children

First Aid Procedures

• Inhalation: Remove person to fresh air.

• Skin Contact: Wash thoroughly with soap and water.

• Eye Contact: Flush eyes with plenty of water for at least 15 minutes.

• Ingestion: Do not induce vomiting. Seek immediate medical attention.

• Note: For all exposures, if irritation persists, seek medical advice and show the product label or Safety Data Sheet (SDS).